Primal RC 1/5 Raminator Monster Truck RTR

This one is not for the faint of heart. We tried our best to make this perform as close to possible to scale as a real-life Monster truck.1/5scale Primal RC Raminator Monster truck is a heavy monster of the machine. It is one of the most powerful RC vehicles you have ever seen!

We did our best to make it perform as close as possible to a real-life monster truck. We built it really tough and wanted to make something really special for the RC world.

You can set it up for a quick monster-truck performance, or in low range for great rock crawling. Includes five different gear ratios! This truck is nearly unstoppable, but when you do get stuck, just press the transmitter’s reverse switch to exit any situation. I hope you enjoy this as much as I do!

Features:

Solid shaft, CNC aluminum axle tube with steel axle. Heavy-duty CNC aluminum housing oil-imme rsed 4-bevel gear diffe rential. Steel ring and pinot gear. The modular shaft tube design is easy to maintain. Ready to use in the rear-wheel steering conversion kit.

Suspension and drive train, adjustable four-link shock absorber long-distance travel suspension. 12-inch aluminum oil-filled heavy-duty impactor. Swing rod. Rugged aluminum four-link suspension shaft with He im steel joints.

Double-chain drive all-steel gear single speed transmission. Multiple gear ratio options enable high-speed and torque adjustment. Transmitter operation is reversed. The design is easy to maintain.

49cc reed valve engine, 49cc 2-stroke air-cooled reed valve for scooter engine. The rated power exceeds 6 horsepower. Designed to obtain high torque at low RPM.80mm centrifugal clutch setting. Custom-designed steel-regulated exhaust pipe.

The two-piece polycarbonate body of the truck body is mounted on a customized heavy-duty plastic roll cage. The whole body and cage assembly are easy to disassemble and easy to maintain. Detailed internal driver diagram.

Brakes, front and rear axle manual disc brakes with steel rotors. Equipped with a powerful brake servo, which can provide a powerful braking force.

Standard Features:

• Six Piece Modular 5mm thick CNC Aluminum chassis
• 49cc 4 bolt 2 stroke reed valve 2 stroke pull start engine with remote engine kill switch!
• Large 12-inch long high volume CNC Aluminum body coil over dual spring shocks
• Adjustable aluminum 4-link suspension with steel Heim joint ends
• Large 78mm Centrifugal Clutch
• All Steel HD drive train and double chain driven single-speed transfer case with counter-rotating drive shafts
• 5 different interchangeable gear ratios to choose from.
• Heavy Duty CNC Aluminum modular Axles
• Front and rear CNC cased oil filled torque control differentials for awesome on-road or off-road performance
• Massive 12″x7.5″ High traction tires mounted on 24mm hex bead-lock Nylon rims with inner tire foams
• Tuned pipe for maximum performance and sound
• Front and Rear Sway bars
• Dual Steering Servos with inter grated adjustable servo saver system with steel Heim joints
• Front and Rear axle-mounted mechanical disc brakes
• Strong Plastic roll cage and Strong 2 piece Polycarbonate body shell with detailed interior and Raminator Sticker Sheet
• Radio-controlled reverse feature
• Strong CNC Aluminum parts are used just about everywhere in this truck!
• Ball bearings used throughout the entire vehicle
• Large 1200cc Fuel Tank for super long run times (a few hours!)

Radio Features:

FLYSKY FS-GT5 2.4 ghz 6 channel computer radio that features include:

• 4-AA Battery holder for light weight and improved balance
• Easy-to-read LCD screen
• 200 Meter max range 20 model memory
• Servo reversing on all channels
• Dual rate steering
• End point adjustment on all channels
• Exponential steering and throttle
• Anti-lock braking, Digital trim display
• Servo sub-trim for steering and throttle
• 3 character model naming
• Built-in adjustable Fail-safe
• Low voltage alarm.
• Crawl mode ready for 4-wheel steering setups
• Even more…..

Metal parts:

• Steel 24mm wheel hubs
• CNC Aluminum 6 piece modular frame
• CNC Aluminum Dual servo steering system and servo saver
• CNC Aluminum front skid plate and axle/steering protector
• CNC Aluminum chassis connectors
• CNC Aluminum engine mounts
• CNC Aluminum enclosed clutch brace
• CNC Aluminum chain drive case cover
• CNC Aluminum transmission case
• CNC Aluminum front and rear brakes with steel rotors
• CNC Aluminum Differential with steel oversize ring and pinion gears
• CNC Aluminum Axle tubes, with dual ready shock mounts
• CNC Aluminum Modular Axles
• CNC Aluminum parts throughout the entire vehicle!

Electronic Features:

• (2) 70KG Steering Servos
• Single 70KG Brake Servo
• 20KG Throttle Servo
• 20KG Reverse Servo
• 7.2 volt 4800mah Servo/Receiver Battery with wall charger
• Remote-activated engine kill switch

Specifications:

Skill Level: Advanced
Speed: 30+ MPH
Length: 39 inches
RTR Weight: 80 pounds
Height: 24 inches
Wheelbase: 24 inches
Tires: 12 x 7.5 inches
Track: 31.5 inches
Wheel Diameter: 5.5 inches
Wheel Width: 6 inches
Minimum Ground Clearance: 4 inches